EFTPOS - AADE Configuration Instructions Click HERE to find all EFTPOS terminal Configuration Instructions on the AADE page. In the “POS Interconnection Guides” section, refer to the relevant Provider and then to the terminal model. On the same page, in the “ROUTER Setup Guides” section, you will find router setup instructions for reserving an IP range so they can be safely used as static IPs. Circular 2044 / 19-06-2024 Clarifications Regarding the Mandatory Interconnection of Electronic Funds Transfer at the Point of Sale (EFT/POS) Terminals with Business Cash Register Systems and AADE
Click HERE to find all EFTPOS terminal Configuration Instructions on the AADE page. In the “POS Interconnection Guides” section, refer to the relevant Provider and then to the terminal model. On the same page, in the “ROUTER Setup Guides” section, you will find router setup instructions for reserving an IP range so they can be safely used as static IPs.
Circular 2044 / 19-06-2024 Clarifications Regarding the Mandatory Interconnection of Electronic Funds Transfer at the Point of Sale (EFT/POS) Terminals with Business Cash Register Systems and AADE
Useful Information The firmware version of the F.C.R. and the terminal must be the latest. Know the IP address and communication port of the EFTPOS terminal. The EFTPOS must already be registered in eSend and we must have followed the manufacturer’s instructions for its interconnection with AADE. The F.C.R. and the EFTPOS must be connected to the same local network with Internet access.
The EFTPOS must already be registered in eSend and we must have followed the manufacturer’s instructions for its interconnection with AADE.
EFTPOS Configuration Steps at a Glance Configure the EFTPOS according to the manufacturer's instructions Register the IP address and communication port of the EFTPOS in the F.C.R Pair the F.C.R. with the EFTPOS by following the instructions corresponding to the F.C.R. model Repeat the process for each EFTPOS device Program the card payment methods
The Importance of the Company Name on EFTPOS Terminals Each company providing EFTPOS terminals (Epay, Nexi, Cardlink, Mellon, Viva, etc.) develops its own software. As a result, terminals may have the same model name and appearance but operate quite differently in practice. For example, the instructions for an Ingenico Desk 3200 terminal provided by Company A may not be applicable to an Ingenico Desk 3200 terminal provided by Company B. Therefore, it is not enough to know only the terminal model. It is also necessary to know which company (not which bank) provides the terminal
Each company providing EFTPOS terminals (Epay, Nexi, Cardlink, Mellon, Viva, etc.) develops its own software. As a result, terminals may have the same model name and appearance but operate quite differently in practice. For example, the instructions for an Ingenico Desk 3200 terminal provided by Company A may not be applicable to an Ingenico Desk 3200 terminal provided by Company B. Therefore, it is not enough to know only the terminal model. It is also necessary to know which company (not which bank) provides the terminal
Interconnection with a Terminal Using Middleware In case of interconnection with a terminal using Middleware, the connection bridge must be activated from the terminal side before each communication with the cash register, such as initial connection, card receipt issue, preloaded receipt and Z report issue
In case of interconnection with a terminal using Middleware, the connection bridge must be activated from the terminal side before each communication with the cash register, such as initial connection, card receipt issue, preloaded receipt and Z report issue
The portable router is configured with the following parameters: Network Name: ICS-XXXXX (printed on the label and unique for each device) Network Password: XXXXXXXXXXXXXXXXXX (printed on the label and unique for each device) Router IP: 192.168.150.1 DHCP address range that can be automatically assigned to the cash register: 192.168.150.100 to 192.168.150.200 Available addresses for EFTPOS use: 192.168.150.2 to 192.168.150.99 and 192.168.150.201 to 192.168.150.254
DHCP address range that can be automatically assigned to the cash register: 192.168.150.100 to 192.168.150.200
Available addresses for EFTPOS use: 192.168.150.2 to 192.168.150.99 and 192.168.150.201 to 192.168.150.254
Programming Details for Middleware Connection EDPS: IP: 167.99.85.233 Port: 9090 ACQ: 011 EPAY: IP: 51.138.96.24 Port: 11000 ACQ: 103 MELLON: IP: 52.214.88.190 Port: 7286 or IP: 34.252.58.221 Port: 7286 or IP: 45.83.45.16 Port: 57286 ACQ NBG Pay: 011 or Attica: 017 or Pancreta: 024 or PBT (Thessalias): 012 or JCC: 010 or PAYZY: 703 SUMUP: IP: 46.51.201.79 or 63.32.87.42 or 176.34.153.222 Port: 443 ACQ: 647
MELLON: IP: 52.214.88.190 Port: 7286 or IP: 34.252.58.221 Port: 7286 or IP: 45.83.45.16 Port: 57286 ACQ NBG Pay: 011 or Attica: 017 or Pancreta: 024 or PBT (Thessalias): 012 or JCC: 010 or PAYZY: 703
EFTPOS Configuration Instructions - PDF EFTPOS Configuration Instructions - DELTA (DNT) EFTPOS Configuration Instructions - MICRO (DCZ) EFTPOS Configuration Instructions - MICRO II (DLC) EFTPOS Configuration Instructions - MICRO III (DMM) EFTPOS Configuration Instructions - MAXI (CCS) EFTPOS Configuration Instructions - MAXI II (DMN) EFTPOS Configuration Instructions - TOP EFTPOS Configuration Instructions - TOP II EFTPOS Configuration Instructions - i30 EFTPOS Configuration Instructions - POSEIDON NET EFTPOS Configuration Instructions - POSEIDON II EFTPOS Configuration Instructions - CITIZEN FISCAL II ICS Portable Router Connection Instructions for Cash Registers and Payment POS Terminals
